How do I install this ? 

First you need to measure the area over which use need to install using a measuring tape. Always add at least 5 cm to length and width to allow for curves and to cut according to size

Clean desired area with soapy water and dry thoroughly. Carefully inspect desired area after cleaning to ensure there are no dirt or dust particles as this will impact the results

Stretch film using both hands over desired area. Large areas like bonnets may require 2 people. Starting from the middle, use felt side of squeegee to firmly smooth film from the middle of area to the edges. This will ensure there are no air bubbles. 

Cut the excess film from the edges for a smooth and professional finish

  • Be aware of the outside temperature. Ideal conditions for installation are 15°C to 30°C
  • The hairdryer can be used to assist with wrapping vinyl around curves. Make sure to use a low heat setting and keep the dryer at least 20 cm away from the vinylPlease note : This vinyl is a DIY Product and Style My Ride cannot accept any responsibility for errors in the application process.
  • Careful planning and patience is useful. Applying a flat material to a complex or curved surface is difficult. We recommend that you have a trial run with a small piece to get a feel for working with the product. Take your time and be gentle with the product and you will have great results as many customers before you have had having fun decorating their cars/bikes/boats etc. and saving money by doing it themselves.

What tools do I need to install this ?

  • Felt tipped squeegee
  • Stanley knife
  • Measuring tape

Please wait...

has been added to your Shopping Cart.

Continue shopping
View cart & checkout

Sign Up Now and Get

10% off your first order

* required fields

Privacy Policy
You can unsubscribe at any time.

Sign up for:

  • Sale items
  • Discount codes
  • Latest release Vinyls & Stickerbombs
  • Member only discounts
  • Competitions